featured

***Ships in 1 Day*** 

Dual chutes for 16-24 volts systems.

Important: If parachute cables are 9 1/2 feet or longer it is recommended to use 24 volts. Anything less than 9 1/2 feet 16 volts is ok.

All systems are approved from NHRA and IRHA for championship competition drag racing, you should have no problem going thru tech.

All systems have a 2 year warranty.

***Ships in 1 Day***

Single chute for 12-14 volts systems. This system is made for smaller race cars perfect for extra safety, especially if you're shifting.

All systems are approved from NHRA and IRHA for championship competition drag racing, you should have no problem going thru tech.

All systems have a 2 year warranty.

At only 1.2 lbs, the all-new weight saving design makes it one of the smallest and lightest head and neck restraints on the market, giving drivers the ultimate in comfort and performance. The REV2 Lite is SFI 38.1 certified, so you can rest assured that it performs just as well as the competition. With a new integrated adjustable tether design, sizing and fitment are easier than ever. The belt channels have friction pads and high outer belt guides to help keep your shoulder harnesses in place while driving and under multiple impacts. The yokeless design of the REV product line means drivers can strap in with no extra pressure on the chest or collarbones, and the quick release helmet hardware comes included at no extra charge.

• Graphics display with adjustable backlight
• Outdoor bright LEDs with adjustable brightness
• Integrated transbrake-like button
  • Press or Release transbrake button to capture reaction time
• Battery Powered
  • 2 AA batteries
  • Low power sleep modes to preserve battery life
• 3" Wide X 4 1/2" High
• Full, Pro, and Blocker Tree and Instant Green Tree
• Adjustable Tree Speed (0.100 to 0.900 available)
• .000 Perfect Tree
• Adjustable Delay Box
  • Bump Up or Down
  • Twice your tree
• Shift light
  • Practice up to 4 shift points
• Adjustable Rollout
• NHRA / IHRA Auto Start
• Auto or Manual Reset
• Enable / Disable Win Lights
  • Set time to beat
• Perfect Tree (0.000 vs. 0.400/0.500)
• Bump Stage
  • Press stage button a random number of times to stage the tree
• Result Blocker
  • Blocks reaction times and red lights - must view statistics to see results
• Statistics
  • Saves last 20 reaction times and bumps taken
  • Tracks number of hits, red lights, and wins in the practice session
  • Calculates average reaction time and reaction time spread
  • Calculates shift averages
• Compatible with Eliminator Next Gen accessories:
  • Item #8310 Throttle / Clutch / Brake Pedal
  • Item #8300 Transbrake Vehicle Connection
  • Item #8305 Microswitch Vehicle Connection
• Not Compatible with #7000 Pocket Pal Accessories:
  • Item #7310A Throttle Pedal
  • Item #7310B Clutch Pedal
  • Item #7300 Transbrake Vehicle Connection
     

This listing is for a 10' spring-loaded chute with 4 lines. It is designed and tested for vehicles running under 200mph (293.33 fps) and up to 2499lbs (1133.52 kg.) This Racer Direct Parachute Kit contains a chute, pilot chute, nylon bag, keeper, mounting plate, and simple packing instructions.

Racer Direct Parachutes are proudly manufactured in the U.S. Each chute uses the highest quality materials available and undergoes a strict quality control process before it is shipped out of the manufacturing plant. These chutes are built to give your dragster a reliable, repeated, and straight stopping power as it scrubs off the speed from your winning run. They are easy to pack and can be done in minutes.

Wearing helmet supports serve many purposes. It helps prevent driver fatigue and C-Spine injuries in a crash. Wearing this simple device softens G Force applications and other Delta-V incursions that affect a driver's vision and performance. They are SFI 3.3 approved and feature high-density foam to help cushion impacts. Wide Velcro closures make for quick and easy removal.

Wearing helmet supports serve many purposes. It helps prevent driver fatigue and C-Spine injuries in a crash. Wearing this simple device softens G Force applications and other Delta-V incursions that affect a driver's vision and performance. They are SFI-3.3 approved and feature high-density foam to help cushion impacts. Wide Velcro closures make for quick and easy removal.

This is our latest design for the Jr 790 index cars. This Jr Dragster Parachute has a 4-foot canopy and is attached with eight 9'6" lines. With the new design and materials, this parachute weighs in at only 2.5 lbs.

Our Parachute package comes with a Parachute, Pilot Chute, 5" x 5" Nylon Bag, Keeper, Mounting Plate, and "Remove Before Flight" Flag. Simple packing instructions are also provided. The steel plate inside the bag is NOT pre-drilled so you can mount this on just about every manufactures chassis.

These measure out to 18" X 8" X 8". These tire covers are water and oil resistant. Both outside edges have an elastic band and a wrap-around design that secures them with 3" wide heavy duty Velcro.

Kids/Youth 2-Piece Fire Suit (Jacket and Pants). YOUTH SUIT SIZING IS BASED ON THE AGE OF THE CHILD. For example, Size 6/8 means that it will fit the average child 6/8 years of age.

This black jacket has two stripes running down the right side of the chest. The left-arm has the single layer SFI 3-2A/1 tag, the Racer Direct logo, and the American Flag. The right arm also carries the Racer Direct logo. The jacket has a pleated flexible back, which allows you to sit in your vehicle comfortably and gives you a larger range of motion. This item also contains an elastic bottom hem and a Velcro strap on the collar. This is a racing suit and not cold-weather clothing. It is designed specifically for racing and complies with SFI regulations.

This suit is made with a treated flame-resistant cotton outer layer that's light and breathable when not exposed to a high heat source or fire. All Racer Direct fire-resistant suits have Nomex zippers, thread, and cuffs for extra protection and durability. These fire suits exceed SFI testing and the TPP Rating for a single-layered item.

*Gloves and shoes not included.

A kids one-piece single-layer racing suit. This black suit has all black arm and leg Nomex cuffs. On the left arm is the single-layer SFI 3.2A/1 tag, the Racer Direct logo, and the American Flag. The right arm also has the Racer Direct logo. The suit has a pleated flexible back, which allows you to sit in your vehicle comfortably and gives you a larger range of motion. This item also contains an elastic waistband and a Velcro strap on the collar. This is a racing suit and not cold-weather clothing. It is designed specifically for racing and complies with SFI regulations.

This suit is made with a treated flame-resistant cotton outer layer that's light and breathable when not exposed to a high heat source or fire. All Racer Direct fire-resistant suits have Nomex zippers, thread, and cuffs for extra protection and durability. These fire suits exceed SFI testing and the TPP Rating for a single-layered item.

*Gloves, shoes, and helmet not included.

This pink suit has black arm and leg Nomex cuffs. On the left arm is the single-layer SFI 3.2A/1 tag, the Racer Direct logo, and the American Flag. The right arm also has the Racer Direct logo. The suit has a pleated flexible back, which allows you to sit in your vehicle comfortably and gives you a larger range of motion. This item also contains an elastic waistband and a Velcro strap on the collar. This is a racing suit and not cold-weather clothing. It is designed specifically for racing and complies with SFI regulations.

This suit is made with a treated flame-resistant cotton outer layer that light and breathable when not exposed to a high heat source or fire. All Racer Direct fire-resistant suits have Nomex zippers, thread, and cuffs for extra protection and durability. These fire suits exceed SFI testing and the TPP Rating for a single-layered item.

This is a Non-SFI Universal diaper and will fit both Small Block and Big Block Motors. This entire diaper is made from oil and water-resistant materials. It comes with 6 anchor mounts and an oil pad. The four side mounts attach with the header / exhaust bolts and the front two are attached with the water pump bolts. These are IHRA / NHRA accepted and are Made in the USA. Keep the oil off track and in the pad, not where your tires can be punctured by pieces of the engine or loose traction from the oil on the track. More and more tracks are requiring these when you go through tech inspection. Don't be left in the stands watching the racing when you could be in the drivers seat.

This suit is made with a treated flame-resistant cotton outer-layer that's light and breathable when not exposed to a high heat source or fire. All Racer Direct fire-resistant apparel have Nomex zippers, thread, and cuffs for extra protection and durability. This fire suit exceeds SFI testing and the TPP Rating.

This suit has all black arm and leg Nomex cuffs. On the left arm is the SFI tag, the Racer Direct logo, and the American Flag. The right arm also has the Racer Direct logo. The suit has a pleated flexible back, which allows you to sit in your vehicle comfortably and gives you a larger range of motion. This item also contains an elastic waistband and a Velcro strap on the collar. This is a racing suit and not cold-weather clothing. It is designed specifically for racing and complies with SFI regulations.

* Helmet, gloves, and shoes not included.

Kids/Youth 2-Piece Fire Suit (jacket and pants). YOUTH SUIT SIZING IS BASED ON THE AGE OF THE CHILD. For example, Size 6/8 means that it will fit the average child 6/8 years of age.

This pink jacket has two stripes running down the right side of the chest. The left-arm has the single layer SFI 3-2A/1 tag, the Racer Direct logo, and the American Flag. The right arm also has the Racer Direct logo. The jacket has a pleated flexible back, which allows you to sit in your vehicle comfortably and gives you a larger range of motion. This item also contains an elastic bottom hem and a Velcro strap on the collar. This is a racing suit and not cold-weather clothing. It is designed specifically for racing and complies with SFI regulations.

This suit is made with a treated flame-resistant cotton outer layer that light and breathable when not exposed to a high heat source or fire. All Racer Direct fire-resistant suits have Nomex zippers, thread, and cuffs for extra protection and durability. These fire suits exceed SFI testing and the TPP Rating for a single-layered item.