Fuel Tanks and Fuel Cells

A single 5-gallon utility liquid or fuel dump jug. The jug is vented, has both gallon and liter markings along the sides, and a rubber gasket seal. The jug also has two handles for easy pouring and an easy-to-twist-off cap. The overall height of the jug is 19.75," and it measures out 9.5" around. This jug is very light, weighing 2lbs 12oz dry. This is the best deal out there! Not only good for the racing world, but also great for storm survival. During hurricanes, these can be used to store the fuel for your generator, or water for cooking/bathing. It can be used to hold just about any liquid.

Case (6 jugs) of 5-gallon utility or fuel dump jugs. The jugs are vented and have both gallon and liter markings along the sides, and a rubber gasket seal. The jugs also have two handles for easy pouring with a 2" neck. These necks are smaller than most of the jugs on the market today, allowing for a more controlled pour for smaller tanks. This is the best deal out there! Not only good for the racing world, but also great for storm survival. During hurricanes, these can be used to store the fuel for your generator, or store water for cooking/bathing. We also have these for sale individually.

A 4-gallon short polycarbonate fuel cell. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have the following foams available:

• Race Gas
• Methanol and other Additives 

A 5-gallon polycarbonate fuel cell with a sump. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings that are attached to the bottom of the sump. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives 

An 8-gallon polycarbonate fuel cell with a sump. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings that are attached to the bottom of the sump. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives

An 8-gallon polycarbonate fuel cell. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives 

An 11-gallon polycarbonate fuel cell. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives 

A 12-gallon polycarbonate fuel cell with a sump. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings that are attached to the bottom of the sump. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives 

A 15-gallon polycarbonate fuel cell with a sump. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings that are attached to the bottom of the sump. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives 

A 15-gallon polycarbonate fuel cell. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives 

A 22-gallon short polycarbonate fuel cell. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives 

A 22-gallon long polycarbonate fuel cell. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives 

A 32-gallon polycarbonate fuel cell. This cell is equipped with a -8 AN inlet and -8 AN outlet fittings. This durable impact resistant cell is also equipped with a -8 AN rollover valve on the top of the cell. This cell can use gasoline, E-85, alcohol, and methanol fuels. These cells come out of our molds blank, so if you need the fitting in a different location or a different size #AN fitting, we can make that happen. This fuel cell is ready to use right out of the box. Because of the shape of this cell, these are not only great for racing but for off-road, marine, and farming applications.

We have three different caps available:

• Raised Plastic Cap Vented
• Metal D-Ring Cap Vented
• Aircraft Style Cap Vented

We have the following foams available:

• Race Gas
• Methanol and other Additives