Vehicle Safety

This is a Non-SFI Universal diaper and will fit both Small Block and Big Block Motors. This entire diaper is made from oil and water-resistant materials. It comes with 6 anchor mounts and an oil pad. The four side mounts attach with the header / exhaust bolts and the front two are attached with the water pump bolts. These are IHRA / NHRA accepted and are Made in the USA. Keep the oil off track and in the pad, not where your tires can be punctured by pieces of the engine or loose traction from the oil on the track. More and more tracks are requiring these when you go through tech inspection. Don't be left in the stands watching the racing when you could be in the drivers seat.

This transmission blanket is made from oil and water resistant materials, with 10 ballistic layers of material. This blanket measures 11.5" wide and 47" long. The 2" 7-panel webbing can wrap around any automatic or manual transmission (EXCEPT LENCO TRANSMISSIONS)

These are IHRA/NHRA accepted and made in the USA. NHRA rules require that any automatic transmission equipped car running 10.99 or quicker (or faster than 135 mph) must be equipped with a transmission shield or blanket-type shield with an SFI rating of 4.1. The straps on the blanket can handle 24,000 pounds of pressure.

INCLUDES:

• 2 RJS Sportsman Radios
• 1 Sportsman Crew Chief Headset
• 1 Quick Disconnect Cable for Headset 2.5 (M1)
• 1 IMSA Harness Wire for Sportsman and Pro Radio
• 1 4-inch in Car Radio Jumper 2.5 (M1)
• 1 Steering Wheel Push Button w/ Velcro
• 1 Sportsman Helmet Mic/Helmet Speakers
• 1 Radio Pouch for Vehicle

IP55 Rating Water Resistance & Dust Protection

Rugged and Heavy-Duty Design

16 Programmable Channels

INCLUDES:

• 2 RJS Pro Radios
• 1 Pro Crew Chief Headset
• 1 Quick Disconnect Cable for Headset 2.5 (M1)
• 1 IMSA Harness Wire for Sportsman and Pro Radio
• 1 4-inch in Car Radio Jumper 2.5 (M1)
• 1 Steering Wheel Push Button w/ Velcro
• 1 Sportsman Helmet Mic/Helmet Speakers
• 1 Radio Pouch for Vehicle

Crisp, Clear and High Quality Sound

IP55 Rating Water Resistance & Dust Protection

Robust, Rugged and Heavy-Duty Design

200 Programmable Channels

This listing is for a 10' spring-loaded chute with 4 lines. It is designed and tested for vehicles running under 200mph (293.33 fps) and up to 2499lbs (1133.52 kg.) This Racer Direct Parachute Kit contains a chute, pilot chute, nylon bag, keeper, mounting plate, and simple packing instructions.

Racer Direct Parachutes are proudly manufactured in the U.S. Each chute uses the highest quality materials available and undergoes a strict quality control process before it is shipped out of the manufacturing plant. These chutes are built to give your dragster a reliable, repeated, and straight stopping power as it scrubs off the speed from your winning run. They are easy to pack and can be done in minutes.

This listing is for a 10' Racer Direct Drag Parachute with 8 lines. It is designed and tested for vehicles running under 200mph (293.33 fps) and up to 2999lbs (1160.32 kg.) This Parachute Kit contains a chute, pilot chute, nylon bag, keeper, mounting plate, and simple packing instructions.

Racer Direct Parachutes are proudly manufactured in the U.S. Each chute uses the highest quality materials available and undergoes a strict quality control process before it is shipped out of the manufacturing plant. These chutes are built to give your dragster a reliable, repeated, and straight stopping power as it scrubs off the speed from your winning run. They are easy to pack and can be done in minutes.

This rectangular net measures 24" across the top and bottom, and 18" on the sides. This item comes with a current SFI tag for the month/year that it is purchased. This item is eligible for recertification after two years after purchase. There are double-folded rod sleeves along the top and bottom to accept any standard window net installation rods. This all-purpose safety net will keep objects from coming through and will keep your arms contained inside the vehicle. Great for off-road use and select sanctioning bodies that require SFI approved nets.

The net measures 23" across the top, and 18" on the right side, 32" across the bottom and 20" on the left angle. This item comes with a current SFI tag for the month/year that it is purchased. This item is eligible for recertification after two years after purchase. There are double-folded rod sleeves along the top and bottom to accept any standard window net installation rods. This all-purpose safety net will keep objects from coming through and will keep your arms contained inside the vehicle. Great for off-road use and select sanctioning bodies that require SFI approved nets.

The net measures 20.5" across the top,  and 15" on the right side, 20.5" across the bottom and 19" on the left. This item comes with a current SFI tag for the month/year that it is purchased. This item is eligible for recertification after two years after purchase. There are double-folded rod sleeves along the top and bottom to accept any standard window net installation rods. This all-purpose safety net will keep objects from coming through and will keep your arms contained inside the vehicle. Great for off-road use and select sanctioning bodies that require SFI approved nets.

The net measures 24" across all four sides. This item comes with a current SFI tag for the month/year that it is purchased. This item is eligible for recertification after two years after purchase. There are double-folded rod sleeves along the top and bottom to accept any standard window net installation rods. This all-purpose safety net will keep objects from coming through and will keep your arms contained inside the vehicle. Great for off-road use and select sanctioning bodies that require SFI approved nets.

This non-SFI padding is 3 feet in length and has a pre-cut slit along the side and the hole all the way through. The hole that measures out at 1.75".

Keep your doors and paint from damage from overextension by the wind or other forces by installing these American-made Door Limit Straps. These are adjustable and come with all the necessary hardware to install. Wrap one end around a roll bar and adjust it through the slide bar. Attach the D ring to the door and then open up and attach the Quick Release latch and you are good to go.

It's not a matter "If" your doors will get damaged without these, it's a matter of "When." To protect the doors and paint, your time and money so you don't have to spend hours re-aligning the door, straightening out the metal or fiberglass, and re-painting with this inexpensive solution.

Max Pressure is 1800 PSI

This is our latest design for the Jr 790 index cars. This Jr Dragster Parachute has a 4-foot canopy and is attached with eight 9'6" lines. With the new design and materials, this parachute weighs in at only 2.5 lbs.

Our Parachute package comes with a Parachute, Pilot Chute, 5" x 5" Nylon Bag, Keeper, Mounting Plate, and "Remove Before Flight" Flag. Simple packing instructions are also provided. The steel plate inside the bag is NOT pre-drilled so you can mount this on just about every manufactures chassis.

This listing is for a 10' Racer Direct Drag Parachute with 8 lines. It is designed and tested for vehicles running under 200mph (293.33 fps) and up to 2999lbs (1160.32 kg.) This Parachute Kit contains a chute, pilot chute, nylon bag, keeper, mounting plate, and simple packing instructions.

Racer Direct Parachutes are proudly manufactured in the U.S. Each chute uses the highest quality materials available and undergoes a strict quality control process before it is shipped out of the manufacturing plant. These chutes are built to give your dragster a reliable, repeated, and straight stopping power as it scrubs off the speed from your winning run. They are easy to pack and can be done in minutes.

• Made in the USA
• Highest quality material available
• Built to give you extra stopping power
• All kits come with chute, Pilot Chute bag, Keeper, and Mounting Plate