Cooling & Heating

• 16” Universal Cooling Fan, black
• Curved blades, high flow, low noise
• 2800 CFM
• Includes wiring connector and pigtail and mounting cord

• 14” Universal Cooling Fan, black
• Curved blades, high flow, low noise
• 2500 CFM

• Complete electric thermostatically controlled fan relay kit
• FAN NOT INCLUDED 
• All the wires are 57 inches long with a 16 gauge and include pre-terminated relay mounting block and assorted terminals.
• Supplies current and voltage required by high-performance electric fans while maintaining lower voltage levels at the on-off switch.
• 30 Amp. 5 spade terminal relay, and includes a circuit breaker to help protect against voltage surge that can damage your fan and wiring .Circuit breaker will reset itself.
• The kit includes a relay, a breaker, and a thermostatically controlled on/off switch. On @ 180 Deg. Off @ 170 Deg. will fit 3/8 NPT. and ½ NPT. Wiring Harness with relay terminal block and assorted terminals and applicable hardware.
• Increases consistency, reliability, and safety while allowing to keep the higher amp draw of the electric fan out of the driver's cockpit.

• SB & BB Chevy Aluminum Water Neck
• 90-degree swivel
• Highly polished
• Includes hardware and O-ring seal

• SB & BB Chevy Aluminum Water Neck
• 45-degree swivel
• Highly polished
• Includes hardware and O-ring seal

• Universal Aluminum Radiator, 31”x19”x3”
• 1.5” Top Left Outlet, 1.75” Bottom Right Inlet
• Dual 1.5” cores
• Built-in transmission cooler
• Natural finish

• 16” x 3” Fabricated Aluminum, hexagon
• Billet aluminum cap
• Clear anodized, natural finish

• 10” Universal Cooling Fan, black
• Curved blades, high flow, low noise
• 1150 CFM
• Includes wiring connector and pigtail and mounting cord

• 30 Amp Wiring and Relay Kit
• Supplies proper current and voltage required by high-performance electric water pumps
• Includes wiring, 30 amp relay, breaker, connectors, and hardware

Holley's Mid-Mount complete accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a "bracketless" design (Patent Pending), where the accessories bolt directly to the water pump for a clean, integrated form. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are bottom heater outlets for clearance in tight applications. The Holley designed alternator is just as innovative. This premium alternator utilizes 6-phase technology as found on the C7 Corvette. The water pump also shares its design efficiencies with that of the C7 Corvette. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated.
The Mid-Mount drive completes Holley's trilogy of accessory solutions giving a third option compared to the High and Low-Mount previously released. All three accessory solutions are for LS engines.
When we say "complete", we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A/C compressor, Alternator, P/S pump with reservoir, and the crank damper. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.