Engine & Transmission

This is a Non-SFI Universal diaper and will fit both Small Block and Big Block Motors. This entire diaper is made from oil and water-resistant materials. It comes with 6 anchor mounts and an oil pad. The four side mounts attach with the header / exhaust bolts and the front two are attached with the water pump bolts. These are IHRA / NHRA accepted and are Made in the USA. Keep the oil off track and in the pad, not where your tires can be punctured by pieces of the engine or loose traction from the oil on the track. More and more tracks are requiring these when you go through tech inspection. Don't be left in the stands watching the racing when you could be in the drivers seat.

This is a Non-SFI Universal diaper and will fit both Small Block and Big Block Motors. This entire diaper is made from oil and water resistant aluminized materials. Having an aluminized diaper dramatically helps with header burn and heat displacement to your diaper/blanket. It comes with all the hardware, which includes 8 Black E -coated anchor mounts and an oil pad. There are 6 side mounts that attach with the header / exhaust bolts and the front two are attached with the water pump bolts. These are IHRA / NHRA accepted and are Made in the USA. Keep the oil off track and in the pad, not where your tires can be punctured by pieces of the engine or loose traction from the oil on the track. More and more tracks are requiring these when you go through tech inspection. Don't be left in the stands watching the racing when you could be in the drivers seat.

Mounting kit for Racer Direct engine diaper. Contains (8) anchors.

This transmission blanket is made from oil and water resistant materials, with 10 ballistic layers of material. This blanket measures 11.5" wide and 47" long. The 2" 7-panel webbing can wrap around any automatic or manual transmission (EXCEPT LENCO TRANSMISSIONS)

These are IHRA/NHRA accepted and made in the USA. NHRA rules require that any automatic transmission equipped car running 10.99 or quicker (or faster than 135 mph) must be equipped with a transmission shield or blanket-type shield with an SFI rating of 4.1. The straps on the blanket can handle 24,000 pounds of pressure.

Mounting kit for Racer Direct engine diaper. Contains (6) anchors.

This transmission blanket is made from oil and water resistant materials, with 10 ballistic layers of material. This blanket measures 11.5" wide and 47" long. The 2" 7-panel webbing can wrap around any automatic or manual transmission (EXCEPT LENCO TRANSMISSIONS)

These are IHRA/NHRA accepted and made in the USA. NHRA rules require that any automatic transmission equipped car running 10.99 or quicker (or faster than 135 mph) must be equipped with a transmission shield or blanket-type shield with an SFI rating of 4.1. The straps on the blanket can handle 24,000 pounds of pressure.